Outdoor PoE power supply, 24 V, 5 A, with space for two 45 Ah batteries.
Power supply with backup power to power PoE devices such as surveillance cameras. A 24 V output to power other alarm components or large PTZ cameras. Remote monitoring and control of PoE ports is possible. Batteries are located in a heated, thermostatically controlled, insulated part of the enclosure.
Long life, energy efficient and support is available if something goes wrong, now or in 10 years.
Common areas of use: Power supply of surveillance cameras.
Technical description: Contains a 4-port managed Gbit PoE+ switch with 30.8W per port, a total of 150W including battery recharge. Can be managed over VPN1 for control and status monitoring including power consumption per port. Equipped with a summary alarm and power failure alarm and a 24 V output from the backup for operating other equipment. Thermostatically controlled heating cable. Insulated compartment for batteries and temperature sensor for protection against overload. Works in temperatures from -15°C to +35°C, IP65-rated. Prepared for mounting on a pole. Prepared for logger function for data collection.
Voltage, current and power: Supply voltage: 230 V AC - 240 V AC, 47 Hz63 Hz.
Self-consumption is the power outlet the circuit board has when the system is in operation and in battery operation.
Self-consumption
Circuit board Self-consumption (in battery operation) Comment
Voltage output: 24 V DC. Auxiliary voltage 24 V DC.
Voltage output in battery operation: 24 V DC. 24 V DC that is boosted to 48 V.
Current: 2.5 A. PoE / 48 V DC provides 130 W. 24 V provides a maximum of 1 A out at maximum load on all four PoE ports.
Charging current: Depending on power outlet. 1-5 A.
Power: 150 W. 2
Maximum power per port: 30.8 W.
Number of PoE Ports: + two Ethernet not PoE-powered.
Load outputs: PoE switch can drive load to PoE devices and motherboard can drive one (1) 24 V load output to power other applications. Cabling is prepared for installation of options.
Alarms: Alarms are given for: Delayed mains failure alarm or low battery voltage, disconnected batteries, fuse failure, overcharging and aging of batteries.
Alarms over RJ-45, see manual for alarms that PoEswitch can give.
Protection: Protection against overload, overvoltage, overtemperature, short circuit and deep discharge.
Fuses: Mains fuse: 2.5 A. Battery fuse: 16 A and 30 A